Is The Fados9f1 Fault Detector Is Very Sensitive


Fados9f1 C ircuit having two features. The first feature is Programmable DC Power Supply. It is used to adjust the output power of current and voltage. The adjustment methods of current regulate from 20mA to 1500 mA and the voltage regulates from 0 to 16V. It will produce electronic power supply of V/I graph. The second feature is �IR Temperature Measurement Sensor� , which is used to searching the components of that generating high temperature. These two features are included in that device and it has been decreasing some amount time of troubleshooting the flaw by at least five to ten minutes. The IR temperature measurement sensor is one of the new technique s of troubleshooting.

This technique also deals with the connection of power cable the intact board input and the maximum voltage is made to be adjusted. This adjustment is made by pushing �Power Test� button to the desired voltage from 0 to 100mV to obtain the graph and you can record the graph if needed. After some minutes, it provides the temperature map with the help of IR sensor which is used to measure the component temperature. Then the intact card graph is needed to test the boards which are defected.

The nine functions that are involved in the system includes Double Channel Fault Detection, Fault Detection by Comparison from memory, Equivalent Circuit Diagram, Measuring equipments for Resistor, Capacitor and Diode, Digital PC Oscilloscope of double channel, Square Wave Signal Output of 0.2 to 25KHZ, Analog Voltage Output, DC Power Supply Output made with adjustable current and voltage, and Non-Touched IR Temperature Sensor. The unique feature of this equivalent circuit is the intelligent analysis of the V/I curve and it is difficult to find some other product with all these features.

Again FADOS9F1 provides two additional features like noncontact IR temperature measurement and programmable power supply when compared to FADOS7F1. The first one is programmable DC power supply that involv es this product, which will connect to the power line of UUT and set maximum voltage. Now the test button is activated, device software will produce to give voltage output of 100mV. The current value and voltage va lue is to be saved in your file. After few minutes, measurement of temperature will be done as a process to use high-temperature component and another related defect component.

This technique also deals with the connection of power cable the intact board input and the maximum voltage is made to be adjusted. This adjustment is made by pushing �Power Test� button to the desired voltage from 0 to 100mV to obtain the graph and you can record the graph if needed. After some minutes, it provides the temperature map with the help of IR sensor which is used to measure the component temperature. Then the intact card graph is needed to test the boards which are defected.

The amazing package of this system comes with FADOS9F1 product, two oscilloscope probes, USB cable, Ground cable, IR Temperature sensor, red power cable with alligator clips, black power cable with alligator clips, power adaptor of 19V and 3.9A, CD along with software and user manual of the fados9f1 program . Many companies and departments are suffering to troubleshoot and to repair the electronic boards. But with the help of this device, it can be done easily as well as quickly in their work process daily. This is also one of the major benefits of the system and it will be very helpful for them.

FADOS9F1 is nothing but Fault Detector and Oscilloscope which consists of nine functions in a single device. It is also a computer-based voltage-current tester as well as VI C urve T ester. Normally it is recommended to use in large and medium laboratories to get an output of greater efficiency . The device is made to be developed as a V/I tester from ProT Ar-Ge which is the Industrial Project Design of L & T Ltd Co. This tester will perform the function of PC Oscilloscope which is used to troubleshoot the circuit boards which are printed. The ECU SIMULATOR is made to have two additional functions when compared to the fados7f1 and no other device is available in the market like FADOS9F1 which can perform nine functions with a single device.

Fault Detector and Oscilloscope (FADO) provide nine functions contained in one single device which is simply an amazing feature . It is one of the voltage current tester, which is based on the computer. Voltage Current Tester is otherwise known as VI Curve T ester. This tester is used in medium and large laboratories to provide greater output in an efficient manner. VI tester is made by L Voltage current tester ( VI tester) is activated to find a malfunction that occurs on the circuit board. It can make an use of Microvolt measurement. VI Tester offers output port to determine to attach multiplexer. FADOS product is mainly designed to be performing many functions that meet to require all situations. This device is encountered by the consumers.


About the Author
Dian
Let me inroduce myself, my name is Geraldo Raines and I love it.
Idaho is the only location I've been residing in but I will have to transfer in a yr or two.

Since he was eighteen he's been working as a stock control and order filler but he plans on changing it. To coolect bottle tops is the factor she loves most. She's been working on her web site for some time now.
Check it out here: https://Www.electronicrepairegypt.com/fados9f1-fault-detector-and-oscilloscope-9-functions-in-1-device.html

In the event you loved this information and you would want to receive more info about ECU SIMULATOR please visit the web site.

Comments


No comments yet! Be the first:

Your Response


loading...